Oil & Grease Detail Stain
1/2 Oz bottle of Enamel paint.
Other products to consider: (24)
Due to differences in monitor calibration and operating system gamma settings, we cannot guarantee the accuracy of any paint image or color as it is displayed on your monitor. Please use caution in ordering paint, and pay attention to the title and description of the paint for an accurate representation of the color.
Remember: Paint cannot be returned.
Stir well before applying as stains settle. Apply stain with a fine brush around detail, seems, recessed and standing detail or apply evenly over entire surface. Stain will naturally concentrate in corners and pull up flat surfaces. To blend, thin or remove use 8824, 1156 or 1148 Enamel Thinner. Let dry for 15 minutes, remove excess with thinner using either a moistened cloth or fine brush. Leave 24 hours for full cure. Re-coating before then may result in blending of colors. Seal with clear coat. Always test surface compatibility with paint on hidden area or on same type of surface that is not your finished project.
- Thin paint 3 parts paint to 2 parts thinner
- Adjust compressor to 20-25 PSI
- For Aztek Airbrushes use high flow nozzles, Red #9342, Orange #9343, or Yellow #9344
- Other brand airbrushes use a #3 needle